









verification of functionality
It shows an improvisation of the rotor system "ENAL 546T"with a weight as a power generator.
the "static force" from the weight is diverted
into a rotating output force via lever system.
The permanent force of the weight results in a permanent output force or rotation of the system "ENAL 546T"
See Stop and Go result!
E n e r g y is in the air, you just have to Tap into it!!

example:
see video
Results Summary
The "ROTOR-SYSTEM 546T" makes it possible to gain permanent energy from "static force" or “gravity”. This allows an T-shaped lever - this extends obliquely (45 °) to the drive shaft. The lever takes the static force from the power supply and converts it into a torsional force, which is introduced as a permanent torque into the drive shaft. This results in a permanent drive torque.
The "Rotor-System 546T" basically consists of only 4 main components:
- A drive shaft with disc
- A power generator (e.g., a pressure cylinder, compression spring, or a weight)
- An T-shaped lever
- A cylindrical housing
The "Rotor-System 546T" is protected by international law.
Advantages of this Rotor System are:
performance potential
∅ Permanent torque
0,25 m_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 882 NM
0,50 _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 5.550
1,00 _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 44.000
1,50 _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _119.000
2,00 _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _352.000
2,50 _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _690.000
Basics for the development of different dimensions
AS Ø = rotor diameter (output disc AS) in mm
F   = static force (weight) as a power generator in N
E   = output force in the tension rod
u=   = 0,4 = force deflection factor of F to tangential output force
e   = lever arm 0,25 . ASØ
D   = distance rod, length 0,4 . ASØ
T   = angle lever
M   = driver support attached at AS
FS   = guide disc rotatable at AW
AW   = output shaft
AZ   = support pin attached to FS
DZ   = pressure cylinder Ø = 0,22 . ASØ
Formula used for guidance for the power output of the rotor system of your choice
torque Dm = F (in N) . u . e (in m) = Nm

the performance / speed can be
regulated hydraulically in case
of pressure cylinder
The system results in a new
form of power without fuel!!
The bigger rotor dimensions
are a chance for shipping,
aviation and aerospace!!
Energy is in the air
you just have to tap into it!
Energy from "enal 546T"
and the environment is healthy!!